นำไอเดียโครงการไม้ของคุณให้เป็นจริง เราตระหนักว่า สถาปนิกเป็นผู้นำด้านการออกแบบ เทรนด์ และการเปลี่ยนแปลงในอุตสาหกรรมการก่อสร้าง เราต้องการฟังวิสัยทัศน์การออกแบบของคุณ และช่วยเปลี่ยนวิสัยทัศน์นั้นให้กลายเป็นอาคารที่ใช้งานได้จริงและยืนหยัดได้ตามกาลเวลา CUTEK® มุ่งมั่นที่จะช่วยเหลือสถาปนิกและนักออกแบบในการสร้างผลลัพธ์ที่ดีที่สุดทั้งในด้านความสวยงามและการปกป้องสำหรับโครงการไม้ของคุณ
Download Specifications Sheet Product TDS
STEP 1 PREPARE
New Timber – Clean with CUTEK® Restore as per manufacturer instructions
Previously Coated Timber – Strip coating with CUTEK® Wood Stripper to remove the previous coating and clean with CUTEK® Restore as per manufacturer instructions.
STEP 2 PROTECT
Apply minimum of 2 coats of your chosen CUTEK® timber oil (CUTEK® Extreme CD50 or CUTEK® Wood Preservative) with CUTEK® Colourtone (if desired), allowing ample time for the oil to penetrate and dry between coats.
Maintenance
PREPARE: Clean with CUTEK® Quickclean as per manufacturer instructions
PROTECT: Apply 1 x coat of your chosen CUTEK® timber oil (CUTEK® Extreme CD50 or CUTEK® Wood Preservative) with CUTEK® Colourtone (if desired)
STEP 1 PREPARE
New Timber – Lightly sand timber surface using 180 grit sandpaper before cleaning the surface with mineral turpentine.
Previously Coated Timber – Lightly sand timber surface using 180 grit sandpaper before cleaning surface. Test adhesion of CUTEK® Interior to surface prior to full coating.
STEP 2 PROTECT
Apply minimum of 2 coats of CUTEK® Interior as per manufacturer instructions.
Our CPD training ‘Timber Protection: Issues and Solutions’ covers the technical properties of timber, the effects of moisture and long-term protection options to extend service life. Presented at your premises, our CUTEK® CPD training provides 1 CPD point for each attendee.
Contact us at 1300 1 CUTEK or fill out the form below to book your CUTEK® CPD training.
We understand each project is unique and we want to help architects achieve the right colour for their project. The CUTEK® Colourtone range has been developed over 2 decades to suit the hue and undertones of common Australian timber species and to meet historical and emerging design trends. If there is not a Colourtone that suits your project, we will make a bespoke one in consulation with you and your design brief. Contact us to use our free colour matching service or to request a free sample testpot of your preferred Colourtones.
Westfield Coomera was the first greenfield site development for the Sentre Group in over a decade and timber was utilised as a design element in both interior and exterior built environments.
CUTEK®’s dedicated architectural representative was brought in to assist the architect, designers and builders achieve the desired colour and protection level for timber fittings that were integrated into the overall design.
With CUTEK® Colourtones you can enhance and maintain the natural beauty of your timber, or alter the colour to meet your design requirements of your project.
We care about your project, no matter how big or small. If your project uses timber, we want to be a part of it.
We have an extensive Research and Development program (based in Queensland, Australia), that ensures our wood protection technology is always progressive and insightful, using the best resources and know-how available, to make wood protection products that ACTUALLY WORK.
We formulate bespoke timber protection solutions to meet the unique project needs for architects and designers across Australia. Contact us to get the right solution for your project.
Being sustainable or green has become a slogan, but at CUTEK® it is part of our DNA. The very purpose for the creation of CUTEK® products was to maximise the service life of timber. It is a simple equation: extension of the service life of timber = less trees cut down as their replacement.
CUTEK® products are also manufactured with the use of high-grade recycled raw materials and renewable resources where possible, which decreases waste stream and incinerations. Our internal systems are paperless, and have been since 2012 and we recycle manufacturing materials.
CUTEK® is committed to formulating products with lower Volatile Organic Compounds (VOCs). This means more protective components penetrate and STAY permanently in the coated timber and less VOCs are released into the environment than many of our direct competitor’s products.
Beyond these internal measures, CUTEK® also gives back. We are champions for the ecological use and long-term protection of timber. We are partnered with One Tree Planted and plant 1 tree for every can of CUTEK® timber oil sold worldwide. At CUTEK® sustainability isn’t a slogan, it is in our DNA.
With over 123 million hectares of native forests, Australia has the seventh largest forest area in the world, making up three per cent of the Earth’s forests. These forests are unique and varied – ranging from ancient Gondwana rainforest and tropical mangroves to extensive bush lands made up of native acacia, melaleuca and eucalyptus trees. CUTEK®’s donations help to plant trees all across Australia to recover forests affected by the 2019-20 Black Summer Bushfires and restore native habitat vital for wildlife.
Species: Native trees bring the greatest overall benefit to the ecosystem and region. This includes various types of native trees and companion plants. Depending on the specific needs of each section of habitat being restored, native trees planted may include acacia, banksia, eucalyptus, melaleuca, and many other native species.
One Tree Planted WebsiteWe have always been, and always will be, champions for the ecological use and long-term protection of timber, the most natural resource in the building industry.
The whole reason for the creation of CUTEK® products, was to maximise the service life of timber.
น้ำมันรักษาเนื้อไม้แทรกซึม/ช่วยให้ไม้คงเสถียรภาพที่มีประสิทธิภาพสูงได้รับการพิสูจน์แล้ว พร้อมคุณสมบัติการฟื้นฟูตัวเองที่เป็นเอกลักษณ์ ซึ่งทำงานจากภายในสู่ภายนอกเพื่อควบคุมความชื้น และลดการบิดงอ การโก่งตัว และการแตกหัก CUTEK® Extreme CD50 ช่วยยืดอายุการใช้งานและเพิ่มความสวยงามตามธรรมชาติของไม้ของคุณ
เฉดสีสำหรับผสมกับ CUTEK® Extreme CD50 or CUTEK® Enhance CD50
At CUTEK®, we are all about the timber. Timber brings colour, warmth, depth and beauty to any project. CUTEK® products offer long-term, powerful protection for timber while highlighting its natural warmth, feel and beauty.
CUTEK® timber oils have been independently tested and are proven to offer powerful, long-term protection, cost effective maintenance and dimensional stability improvements that stand up to the most extreme environments. For over 30-years and across many countries, CUTEK® is the trusted name in wood protection.
Superior Mode Of Action
Traditional varnish and natural oil ‘penetrating’ type coatings work by forming a protective film on the surface of the wood to protect against moisture damage. Over time, UV light as well as liquid and gas phase moisture induced timber movement, break down this film causing it to degrade, flake or peel. This allows water to get into the wood which can lead to cupping, warping, splitting and rot. Rectification is costly and time consuming as the old coating will need to stripped away before reapplying.
CUTEK® is different. CUTEK® timber oils penetrate deep into the wood core and drive moisture out of the wood from the inside. This offers superior long-term protection and minimises cupping, warping and splitting. This penetrating oil technology ensures the longest possible service life for your timber and has been proven to work and independently tested by industry experts in many countries over the last 30 years.
Self-Healing Effect
CUTEK® wood finishes work differently to traditional wood stain/wood oil/acrylic/urethane/natural oils/wood coating products in that CUTEK® protects your timber from the inside out. CUTEK® penetrates deeply into the wood core upon application, protecting it from the damaging effects of liquid and gas phase water, significantly increasing the service life of your timber. It does this by remaining PERMANENTLY MOBILE inside the wood, migrating to any cut or perforation with a self-healing action.
Many opposition products claim to be a penetrating oil finish; however, they often contain a mixture of solvents, polymers and cross-linking natural oils (such as linseed and tung oils) that penetrate only a few millimetres before drying to form an encapsulating type varnish. Because these coatings do not have a self-healing effect, once this varnish is exposed to the weather, water can quickly enter the core of the timber especially if it has been cut or perforated with fasteners leading to a rapid loss of dimensional stability. Additionally, the use of some natural oils in wood coatings can contribute to the development of unsightly mould and fungal growth underneath subsequently applied coatings. This situation can be difficult and costly to fix.
CUTEK® Oil
=
TRUE PENETRATION AND MIGRATION WITH SELF HEALING
COMPETING NATURAL OILS / “PENETRATING OILS”
=
ENCAPSULATING COATING
NOTE: Coatings that are not permanently mobile inside the wood and do not exhibit the self-healing effect ARE NOT the same as CUTEK® no matter what is claimed. Our first priority is always to extend and maximise the service life of timber NOT to steer you into the ecosystem of our other products.
At CUTEK® we love timber and create products that highlight the natural colour, grain and beauty of wood. CUTEK® Interior is an almost invisible ultra matt polyurethane protection coating that retains the natural colour, grain, look and feel of your timber.
Almost Invisible Protection
Traditional interior wood coatings can change the appearance and colour of timber, sometimes making it appear artificial and detracting from the wood’s natural beauty. Many of these coatings increase the gloss level in order to improve cleaning and chemical resistance properties.
CUTEK® Interior is different.
By using state of the art innovative and novel technologies, CUTEK® Interior provides the robust protection of a polyurethane coating whilst keeping the natural, ultra matt look and feel of natural wood. Additionally, CUTEK® Interior resists polishing effect, even though it is an ultra matt coating. CUTEK® Interior does not hide or mask timber, it simply protects it.
Safe And User Friendly
CUTEK® Interior has been formulated using advanced renewable materials to be low VOC and low odour. It is fast drying, minimising waiting time between coats and is incredibly easy to use. Any beginner can easily achieve a high-class professional finish. Any maintenance, if required, is fast and simple.
Learn MoreCUTEK® is the trusted and proven choice when it comes timber protection that celebrates the natural beauty of timber while providing powerful protection. Our range of Prepare and Protect products are used in designer homes, commercial and public spaces across multiple continents and different environments.